Lowongan Kerja Terbaru Semua Jurusan PT Freeport Indonesia Juli 2024

Lowongan Kerja Terbaru Semua Jurusan PT Freeport Indonesia Juli 2024

LokerBlog.com (Lowongan Kerja SMA SMK D3 S1 Terbaru Juli 2024) - Memiliki pekerjaan yang baik adalah sebuah Tantangan untuk dapat meraih masa depan. Banyak orang yang tidak bisa mendapatkan pekerjaan karena kurangnya persiapan yang matang. Hal ini selalu disepelekan oleh setiap orang karena memperoleh pekerjaan untuk setiap orang diperlukan kerja keras dan belajar yang tinggi. Anda harus menjadi spesial dan menjadi bagian kriteria perusahaan. Bagaimana anda dapat memiliki kompetensi yang baik jika anda belum mempunyai skill dan bakat tertentu. Skill yang anda punya seharusnya terus diasah sehingga Anda benar - benar memperoleh pekerjaan yang sesuai dengan harapan anda. Untuk melangkah lebih jauh ke dalam dunia karir seharusnya Anda dapat bersaing dengan meningkatkan kompetensi melalui sumber daya manusia yang lebih baik pula. Sebelum anda terjun ke dalam dunia kerja sebaiknya persiapkan diri anda secara matang agar anda lebih mapan dalam bersaing di dunia kerja tersebut. Bagaimanapun Anda harus memiliki kompetensi yang baik sehingga Anda dapat lebih diutamakan oleh perusahaan. Banyak orang yang tidak siap dalam menghadapi dunia kerja sehingga lebih mudah mengalami kegagalan dan lebih cepat gagal dalam persaingan. Untuk menjadi seorang pelamar yang berkompeten sebaiknya asah kemampuan anda khususnya keahlian yang anda kuasai agar anda lebih memperdalami keahlian anda dan mempunyai kualitas yang lebih baik dari yang sebelumnya. Memiliki pekerjaan adalah idaman bagi setiap orang apalagi mempunyai pekerjaan yang sesuai dengan keinginan anda. Tetapi untuk mendapatkan pekerjaan tersebut Anda membutuhkan sebuah kerja keras yang pasti agar anda bisa senantiasa mendapatkan Apakah jalan tersebut dengan sesuai dengan anda. Bagaimanapun juga untuk memperoleh pekerjaan yang baik anda harus belajar dan mengetahui strategi di dalam mencari pekerjaan. Untuk meningkatkan kemampuan dan Sumber Daya Manusia adalah hal yang sangat penting bagi Anda sebelum terjun ke dalam dunia kerja.

Lowongan Kerja PT Freeport Indonesia - PT FREEPORT INDONESIA Merupakan perusahaan tambang mineral afiliasi dari Freeport-McMoRan (FCX) dan Mining Industry Indonesia ( MIND ID ). PTFI menambang dan memproses bijih menghasilkan konsentrat yang mengandung tembaga, emas dan perak. Kami memasarkan konsentrat ke seluruh penjuru dunia dan terutama ke smelter tembaga dalam negeri, PT Smelting. Kami beroperasi di dataran tinggi terpencil di Pengunungan Sudirman, Kabupaten Mimika, Provinsi Papua, Indonesia

Tambang di kawasan mineral Grasberg, Papua - Indonesia merupakan salah satu deposit tembaga dan emas terbesar di dunia. Kami saat ini menambang pada fase akhir tambang terbuka Grasberg. Kami tengah mengerjakan beberapa proyek pada kawasan mineral Grasberg sehubungan dengan pengembangan beberapa tambang bawah tanah berkadar tinggi yang berskala besar dan berumur panjang. Secara total, semua tambang bawah tanah ini diharapkan menghasilkan tembaga dan emas skala besar sehubungan dengan peralihan dari tambang terbuka Grasberg.

Saat ini PT Freeport Indonesia kembali membuka lowongan kerja terbaru pada bulan Juli 2024 untuk mencari calon karyawan yang siap untuk mengisi posisi jabatan yang sedang dibutuhkan. Perusahaan akan mencari kandidat yang terbaik sesuai dengan kualifikasi dan yang cocok untuk posisi yang akan ditempatkan.

Adapun dibawah ini adalah posisi jabatan yang tersedia beserta dengan kualifikasinya saat ini bagi Anda para pencari kerja yang tertarik untuk mengembangkan karir.

Lowongan Kerja Terbaru PT Freeport Indonesia Tahun 2024

Posisi:

1. Domestic Purchasing & Logistics – Clerk, Customs Coordination Osite
Description
1. Review, analyze, and finalize shipping documents including manifest, PO item, invoices, packing list, weight, packages, HS codes,
import permit, Repair and Return Clearance, Personal Effect Documents, BoL/AWB, COO. Submit Import Declaration /PIB in timely
manner, ensure correctness, completeness and comply with Indonesian Customs Regulation and related GOI regulations. Identify
any incompliance, provide analysis, and propose solution for further supervisor review and decision to avoid incompliance and
clearance delay.
2. Review, analyze, and finalize export document, including Repair and Return Clearance, Shipment Schedule, ROA, COA, Invoice,
packing list, LC/AP confirmation, HS code, Royalty Payment Receipt, Surveyor Report, Export permit and quota, and COO. Submit
Export Declaration /PEB in timely manner, ensure correctness, completeness and comply with Indonesian Customs Regulation
and related GOI regulations. Identify any incompliance, provide analysis, and propose solution for further supervisor review and
decision to avoid Shipment delay and or clearance delay.
3. Analyze and provide confirmation of pre alert documents draft including manifest, HS code, packing list, bill of lading, invoices to
Origin and customs agents in timely manner.
4. Coordinate and schedule Customs Inspection with Customs Office through customs agents for all import material including Repair
and Return, Red Channel, Personal Effect and other necessary material that required customs inspection. This includes to prepare
all documents needed for physical inspection to Customs in timely manner.
5. Review, analyze and provide reports of export import realization, iron and steel permit realization, rock sample export permit
quota realization or other permit quota realization report.
6. Monitor customs clearance process (PIB/PEB) up to SPPB/ NPE including maintain consistent communication with customs officer
and diligently provide respond to any issue to avoid delay. Distribute Import (SPPB) for both Green and Red Channel goods and/or
Export (NPE) in timely manner to customs agents for further process. Coordinate with offsite warehouses and customs agents for
material delivery from/to ports.
7. Coordinate and schedule Import Material Quarantine Inspection performed by Indonesian Agricultural Quarantine Agency (IAQA)
for Rock Sample export process.
8. Ensure adherence to General Accounting Principles, Company Policies, Principles of Business Conduct (PBC), Anti-Corruption
(FCPA), Human Rights, SINCERE, etc.
The background, education, and work experience :
S1 Degree in Logistics, Supply Chain, Industrial Engineering or Business Management, or equivalent with at least 5 years working
experience in similarly relevant field. Experience in export import activities or same experience in a related industry.
Knowledge, Skills & Characters
Export Import, Shipping, and Logistics Knowledge
SAP Knowledge
Planning and monitoring
Audit and Analytical SkillSupervisory and leadership
Technical Competencies
Fluent English both spoken and written.
PPJK/Ahli Pabean certification
SAP System
MS Office system
Power BI
Share Point
Ceisa
Dateline: 26 Juli 2024

2. Smelter Operation Readiness – Document Control (Non-Staff)
The purpose of this position is:
Create, administer, maintain all related documents to meet formal requirements and required standards in supporting Manyar Smelter
and PMR groups meeting their objectives.
The key duties and responsibilities of this position are:
1. Perform function and duties using the standard Freeport system including ACONEX, AUTODESK Construction cloud (ACC), SAP and
Enablon.

2. Maintain all sites drawing storage from Manyar Smelter and PMR to ensure the availability of archived drawings are current for all
future projects.
3. Maintaining registered document and drawing register, work pack register, testing and commissioning registers etc.
4. Transmitting of all Design documents and keeping record.
5. Create and implement all document management and control procedures.
6. Work directly with the Project team to support day to day document control requirements.
7. Create work packs for the constructions team and Maintenance of the construction folder.
8. General administration support to the wider project team including filing, printing and other duties as required.
9. Coordinate Capital Project’s Drawing distribution across Manyar Smelter and PMR operational sites through network system and
hardcopies.
10. Interface with Freeport corporate engineering office to ensure critical drawings are properly transferred, received and distributed
throughout site.
11. Develop computerized drawing archiving system to maintain all Manyar Smelter and PMR drawings.
12. Provide service for all personnel at site to access all drawings, including historical piping layout, power line, land contour, P&IDs,
PFDs, and SLDs, etc.
The key challenges in this position include:
All site drawings are received and distributed through electronic transfer using the standard Freeport system on a frequent basis
or as required.
Manage document control budget to ensure no over expenditures.
Manage the functionality of all document control equipment, for example printers, plotters, etc.
Manage the functionality of all document control equipment, for example printers, plotters, etc.
Manage complex deliverables against strict deadlines.
The background, education, and work experience needed to succeed in this job are:
Technical High School (STM) with 5 years of experience in a Document Controller role on a design and construct project.
Experience is preferable related to administrative qualifications of office management, having knowledge of AutoCAD system, able
and understand to read drawing especially drawing design coding system. Strong working knowledge of MS Office, Word, Excel,
Powerpoint, and Team Binder. Experience working as a member of an interdisciplinary team would be an advantage.
Core Competencies (Knowledge, Skills & Characters)
Concern for Safety and Environment.
Achievement Orientation.
Analytical Thinking.
Customer Service Orientation.
Cultural Sensitivity.
Concern for Safety and Environment.
Advanced critical thinking and problem solving.
The key areas in which you have decision-making responsibility are:
Approve or reject access to all documentations.
Maintain all document control system and buildings.
Deadline: 21 July 2024

3. Smelter Operation Readiness – Engineer, Civil
The Purpose of this position:
Provide excellent civil engineering services, including draft/sketch, project schedule, cost estimation, AFE, manual, preliminary plan and
detail design preparation, and material procurement for all area, according to Safety and International Standard and project support
during plant operations for all areas in order to ensure the achievement of the customers’ needs and requirements within the budget
and time frame according to company’s policies and procedures.
The key duties and responsibilities of this position are:

1. Coordinate with other discipline engineer to develop engineering design, including draft/sketch, calculation, preliminary plan, cost
estimation, final concept, detail design, and project execution manual, in order to provide detail engineering guideline to complete
the project within the allocated budget according to regulations and standards.
2. Prepare function, specification, calculation, and material in one data sheet follow the Freeport Standard.
3. Perform one discipline for calculation and design of standard task to be processed by designer.
4. Review actual project construction progress and provide solution on project construction problem through a good coordination
and meeting with relevant party, in order to ensure the development of project according to plan.
5. Review and monitor projects budget, in order to ensure the achievement of projects’ objectives within the allocated budget.

6. Act as quality for material specifications and technical implementation in the field.
7. Communicate with all stakeholders to avoid re-work and ensure the customer satisfaction.
8. Assist and infrequently prepare material specification and check the quantity to be used for further process of material take-off
team.
9. Estimate project scope and those related to technical standards, codes, and specifications in order to determine the most
appropriate engineering design for the project through a good coordination and communication with client or other relevant
department to obtain detail information of the project.
10. Expedite direct charge material procurement (long lead items), in order to ensure all material needed for the project available
according to the project schedule and within the allocated budget.
11. Analyze project scope, estimate cost, prepare project schedule as project guideline, prepare AFE along with its complete
justification to support in obtaining Management Approval to project implementation.
12. Prepare “as built” drawing upon the completion of the project and maintain every document and drawing for each project, in
order to provide documentation and information for future project maintenance, operation, and modification.
13. Perform project commissioning as to ensure all installation, equipment, tools, etc. run properly, obtain agreement from customer
and all related department prior to hand-over process.
The key challenges in this position include:
To design and ensure the output is according with client request and on schedule.
Ability to understand several disciplines engineering material technical specification.
To design a project using as much as possible surplus materials available in warehouse, standardizing site equipment.
To ensure the drawing is according with the specification and following Freeport Standard.
The background, education, and work experience needed to succeed in this job are:

Minimum Education and Experience
S1 Degree in Civil Engineering with 5 years experience in related field.
Core Competencies (Knowledge, Skills & Characters)
Strong managerial and leadership skill.
Decision-making.
Excellent PC skills, with proficiency in AutoCAD and Microsoft products or MS Office literacy.
Ability to manage time and scheduling to meet appropriate deadlines.
Ability to work successfully in stressful situations, and manage multiple tasks.
Ability to use awareness of relationships and impacts of data trends and elements to appropriately recommends actions that
impact both near and long-term company operations and profits.
Ability to independently conduct job accountabilities.
Ability to take directions from leadership team.
Excellent verbal and written communication skills.
Ability to work independently with limited supervision.
Strong attention to detail.
Ability to confirm work for accuracy.
Project Management.
Excellent project safety knowledge.
Mechanical engineering knowledge.
Ability to read all types of drawings.
English.
Familiar with resources leveling.
Strong human relation and interpersonal skills.
The key areas in which you have decision-making responsibility are:
Decide engineering design proposal.
Recommend the most effective technique or engineering to complete the project safely, timely and cost effectively.

Deadline: 21 July 2024

4. Smelter Operation Readiness – Engineer, Electrical
The Purpose of this position:
Provide excellent electrical engineering services, including draft/sketch, project schedule, cost estimation, AFE, manual, preliminary
plan and detail design preparation, and material procurement for all area, according to Safety and International Standard and project
support during plant operations for all areas in order to ensure the achievement of the customers’ needs and requirements within the
budget and time frame according to company’s policies and procedures.
The key duties and responsibilities of this position are:
1. Coordinate with other discipline engineer to develop engineering design, including draft/sketch, calculation, preliminary plan, cost
estimation, final concept, detail design, and project execution manual, in order to provide detail engineering guideline to complete
the project within the allocated budget according to regulations and standards.
2. Prepare function, specification, calculation, and material in one data sheet follow the Freeport Standard.
3. Perform one discipline for calculation and design of standard task to be processed by designer.
4. Review actual project construction progress and provide solution on project construction problem through a good coordination
and meeting with relevant party, in order to ensure the development of project according to plan.
5. Review and monitor projects budget, in order to ensure the achievement of projects’ objectives within the allocated budget.
6. Act as quality for material specifications and technical implementation in the field.
7. Communicate with all stakeholders to avoid re-work and ensure the customer satisfaction.
8. Assist and infrequently prepare material specification and check the quantity to be used for further process of material take-off
team.
9. Estimate project scope and those related to technical standards, codes, and specifications in order to determine the most
appropriate engineering design for the project through a good coordination and communication with client or other relevant
department to obtain detail information of the project.
10. Expedite direct charge material procurement (long lead items), in order to ensure all material needed for the project available
according to the project schedule and within the allocated budget.
11. Analyze project scope, estimate cost, prepare project schedule as project guideline, prepare AFE along with its complete
justification to support in obtaining Management Approval to project implementation.
12. Prepare “as built” drawing upon the completion of the project and maintain every document and drawing for each project, in
order to provide documentation and information for future project maintenance, operation, and modification.
13. Perform project commissioning as to ensure all installation, equipment, tools, etc. run properly, obtain agreement from customer
and all related department prior to hand-over process.
The key challenges in this position include:
To design and ensure the output is according with client request and on schedule.
Ability to understand several disciplines engineering material technical specification.
To design a project using as much as possible surplus materials available in warehouse, standardizing site equipment.
To ensure the drawing is according with the specification and following Freeport Standard.
The background, education, and work experience needed to succeed in this job are:

Minimum Education and Experience
S1 Degree in Electrical Engineering with 5 years experience in related field.
Core Competencies (Knowledge, Skills & Characters)
Strong managerial and leadership skill.
Decision-making.
Excellent PC skills, with proficiency in AutoCAD and Microsoft products or MS Office literacy.
Ability to manage time and scheduling to meet appropriate deadlines.
Ability to work successfully in stressful situations, and manage multiple tasks.
Ability to use awareness of relationships and impacts of data trends and elements to appropriately recommends actions that
impact both near and long-term company operations and profits.
Ability to independently conduct job accountabilities.
Ability to take directions from leadership team.
Excellent verbal and written communication skills.
Ability to work independently with limited supervision.
Strong attention to detail.
Ability to confirm work for accuracy.
Project Management.
Excellent project safety knowledge.
Mechanical engineering knowledge.
Ability to read all types of drawings.
English.
Familiar with resources leveling.
Strong human relation and interpersonal skills.
The key areas in which you have decision-making responsibility are:
Decide engineering design proposal.
Recommend the most effective technique or engineering to complete the project safely, timely and cost effectively.
Deadline: 21 July 2024

5. Smelter Operation Readiness – Engineer, Mechanical
The Purpose of this position:
Provide excellent mechanical engineering services, including draft/sketch, project schedule, cost estimation, AFE, manual, preliminary
plan and detail design preparation, and material procurement for all area, according to Safety and International Standard and project
support during plant operations for all areas, in order to ensure the achievement of the customers’ needs and requirements within the
budget and time frame according to company’s policies and procedures.

The key duties and responsibilities of this position are:
1. Coordinate with other discipline engineer to develop engineering design, including draft/sketch, calculation, preliminary plan, cost
estimation, final concept, detail design, and project execution manual, in order to provide detail engineering guideline to complete
the project within the allocated budget according to regulations and standards
2. Prepare function, specification, calculation, and material in one data sheet follow the Freeport Standard.
3. Perform one discipline for calculation and design of standard task to be processed by designer.
4. Review actual project construction progress and provide solution on project construction problem through a good coordination
and meeting with relevant party, in order to ensure the development of project according to plan.
5. Review and monitor projects budget, in order to ensure the achievement of projects’ objectives within the allocated budget.
6. Act as quality for material specifications and technical implementation in the field.
7. Communicate with all stakeholders to avoid re-work and ensure the customer satisfaction.
8. Assist and infrequently prepare material specification and check the quantity to be used for further process of material take-off
team.
9. Estimate project scope and those related to technical standards, codes, and specifications in order to determine the most
appropriate engineering design for the project through a good coordination and communication with client or other relevant
department to obtain detail information of the project.
10. Expedite direct charge material procurement (long lead items), in order to ensure all material needed for the project available
according to the project schedule and within the allocated budget.
11. Analyze project scope, estimate cost, prepare project schedule as project guideline, prepare AFE along with its complete
justification to support in obtaining Management Approval to project implementation.
12. Prepare “as built” drawing upon the completion of the project and maintain every document and drawing for each project, in
order to provide documentation and information for future project maintenance, operation, and modification.
13. Perform project commissioning as to ensure all installation, equipment, tools, etc. run properly, obtain agreement from customer
and all related department prior to hand-over process.
The key challenges in this position include:
To design and ensure the output is according with client request and on schedule.
Ability to understand several disciplines engineering material technical specification.
To design a project using as much as possible surplus materials available in warehouse, standardizing site equipment.
To ensure the drawing is according with the specification and following Freeport Standard.
The background, education, and work experience needed to succeed in this job are:

Minimum Education and Experience
S1 Degree in Mechanical Engineering with 5 years experience in related field.
Core Competencies (Knowledge, Skills & Characters)
Strong managerial and leadership skill.
Decision-making.
Excellent PC skills, with proficiency in AutoCAD and Microsoft products or MS Office literacy.
Ability to manage time and scheduling to meet appropriate deadlines.
Ability to work successfully in stressful situations, and manage multiple tasks.
Ability to use awareness of relationships and impacts of data trends and elements to appropriately recommends actions that
impact both near and long-term company operations and profits.
Ability to independently conduct job accountabilities.
Ability to take directions from leadership team.
Excellent verbal and written communication skills.
Ability to work independently with limited supervision.
Strong attention to detail.
Ability to confirm work for accuracy.
Project Management.
Excellent project safety knowledge.

Mechanical engineering knowledge.
Ability to read all types of drawings.
English.
Familiar with resources leveling.
Strong human relation and interpersonal skills.
The key areas in which you have decision-making responsibility are:
Decide engineering design proposal.
Recommend the most effective technique or engineering to complete the project safely, timely and cost effectively.
Deadline: 21 July 2024

6. Eng., Underground Geotech GBC #1C
Provide geotechnical recommendation, support and services to GBC Mine Operations by performing ground inspection, collecting
geotechnical/geological information and assessing ground condition in order to achieve the safe and efficient mine operations.
The key duties and responsibilities of this position are:
1. Actively perform ground inspection, monitoring, and geotechnical/geological data collection to review ground support in
development, rehab, and preventive support maintenance (PSM) at production area against stress created by mining activities
(both abutment and load static stress). Communicate findings effectively and propose an improvement to the existing practices or
standard procedures in order to manage the ground support hazards in GBC mines operations based on geotechnical
perspective.
2. Design ground support for rehab and development drift based on ground condition assessments for existing or new development
drifts both at production and at high occupancy facilities in order to achieve production target safely. It requires also providing an
alert system for unstable geotechnical condition.
3. Plan, monitor and assess cave propagation by continuously monitoring of surface subsidence, installation of TDR instruments and
conducting cave inspection. It requires a robust and comprehensive TDR and open hole drilling plans by close communication
with related parties for allocating rigs in timely manner.
4. Provide and communicate actively on geotechnical hazards and forthcoming impacts for development and operation of critical
mine facilities, such as ventilation raises, ore passes and other production facilities.
5. Provide of routine monitoring and attend regular meeting and discussion of wet muck hazards in GBC Mine operations. Work
closely with Geotechnical Superintendent to provide wet muck hazard map and communicate with stake holder. Drafting an
official report to Department of Energy and Mineral Resources (DEMR).
6. Develop skills of subordinates following plans.
7. Meet the PTFI Safety and Environmental Programs and standards.
The key challenges in this position include:
Facilitate several parties that have different needs, concern and priority.
Communicate with several parties who have different background (education, level, etc.).
Discover the most effective way in influencing or convincing others to follow and implement the recommendation.
The background, education, and work experience needed to succeed in this job are:

Minimum Education and Experience
Graduate in Geological, Mining or Civil Engineering with 3 years of experience in the Geotechnical aspect of Underground mine
industry and related field.
Core Competencies (Knowledge, Skills & Characters).
Have knowledge of basic theory of rock mechanics and geotechnical engineering from university course work.
Be able to communicate with field people, lead subordinates, develop or train subordinates and must be energetic & willing to
work in the field.
Dateline : 23 July 2024

7. Smelting & Refinery – CRO Steam Turbine Generator & High Pressure Steam Superheater
Roles & Responsibilities
Preparation and periodical review of Standard Operation Procedures for system.
Control Room Operation of the Steam Turbine Generator C 8.5 R14 ERX Japan Company and High Pressure (HP) Steam Superheat
BOUSTEAD INTERNATIONAL HEATERS BIH 765, including start up and shut down in safe, reliable, efficient manner while ensuring
environmental compliance.
Communication and or coordination with the Local Operator, Hot Metal Operator staff, Steam Let-Down Operator to ensure
cooperation for all operation activities including for periodic switching/confirmation tests, if any.
Provision of trouble shooting and or proposals for efficiency improvements on systems, Unit and or Plant operations, to the
Engineer.
Familiar with all local plant system either equipment, piping, layout, and emergency part in essential action on emergency case
plant or blackout
Preparing of defect reports to SAP both for DCS or Local Operator finding.
Provision of skills and knowledge transfer to the Local Operators an ongoing basis.
Periodic secondment for training Development skills and knowledge obligation by company, whenever required.
Comply and obey with Legal requirements related with Quality, Environmental and Health Policy and other relevant documents in
the Company.
Authority
No Authority
Competency Required
Core Competency :
Adhere to Integrity
Performance Driven
Pursue Continuous Improvement
Team Synergy

Commitment to HSE
Problem Solving & Decision Making
Candidate Requirements
Education: Minimum (D3), bachelors degree is preferable in Mechanical Eng., Electrical Eng., Physic Eng., Chemical Eng.
Work Experience: Minimum 3 years experience in Steam Turbine Generator and/or Power Generation operator, Preferable
Holding any Power Plant Operation Competency Certificate and Boiler Operation Certificate
Personality: Good communication and coordination skills. Quick and enthusiastic learner, attentive to detail, disciplined and
flexible. Ability to adapt to multicultural environment.
Language : Proficient in English, both written and spoken. Fluency in other languages would be advantageous.
Computer Skills : Basic MS-Office (MS-Excel, MS-PowerPoint, and MS-Word), SAP/Maximo.
Noted: Should be able to adapt to multicultural environment, understanding the foreigners, but also acceptable by local
community (Gresik People).
Deadline : July, 21st 2024

8. Smelting & Refinery – Field Operator Steam Turbine Generator & High-Pressure Steam Superheater
Roles & Responsibilities
Supporting in Preparation and periodical review of Standard Operation Procedures for system.
Local Operate of the Steam Turbine Generator C 8.5 R14 ERX Japan Company and High Pressure (HP) Steam Superheat BOUSTEAD
INTERNATIONAL HEATERS BIH 765 and associated Equipment as instruction control room operator, including start up and shut
down in safe, reliable, efficient manner while ensuring safety and environmental compliance.
Communication and or coordination with the control Room Operator, Hot Metal Operator staff and Steam Let-down system
operator to ensure cooperation for all operation activities including for periodic switching/confirmation tests, if any.
Provision of trouble shooting and or proposals for efficiency improvements on systems, Unit and or Plant operations, to Control
Room Operator and Engineer.
Rise any defect issue or anomaly local finding system to Control Room Operator.
Awareness housekeeping in the work scope area in daily basis.
Periodic secondment for training development skill and knowledge obligation by company, whenever required.
Comply and obey with Standard Safety, Legal requirements related with Quality, Environmental and Health Policy and other
relevant documents in the Company.
Authority
No Authority
Competency Required
Core Competency :
Adhere to Integrity
Performance Driven
Pursue Continuous Improvement
Team Synergy
Commitment to HSE
Problem Solving & Decision Making

Candidate Requirements
Education : Minimum Senior High School, (D3), bachelors degree is preferable in Mechanical Eng., Electrical Eng., Physic Eng.,
Chemical Eng.
Work Experience : Minimum 2 years experience in Steam Turbine Generator and/or Power Generation, Preferable Holding any
Power Plant Operation Competency Certificate and Boiler Operation Class certificate
Personality : Good communication and coordination skills. Quick and enthusiastic learner, attentive to detail, disciplined and
flexible. Ability to adapt to multicultural environment.
Language : Proficient in English, both written and spoken. Fluency in other languages would be advantageous.
Computer Skills : Basic MS-Office (MS-Excel, MS-PowerPoint, and MS-Word), SAP.
Noted : Should be able to adapt to multicultural environment, understanding the foreigners, but also acceptable by local
community (Gresik People).
Deadline : July, 21st 2024

Bagi Anda yang berminat, silahkan melakukan pendaftaran secara online:

GABUNG DI CHANNEL TELEGRAM AGAR TIDAK KETINGGALAN INFO LOWONGAN TERBARU SETIAP HARINYA KLIK: 
https://t.me/lokerblog (Channel Lowongan Kerja Terbaru)
https://t.me/infolokerblog (Channel Info Loker Terbaru Tahun 2024)

Informasi:

Diharapkan untuk membaca secara keseluruhan informasi dengan teliti
Hanya pelamar terbaik sesuai klasifikasi yang akan diproses untuk mengikuti seleksi selanjutnya
Selama proses rekrutmen tidak ada dikenakan biaya apapun

Semoga informasi ini bermanfaat bagi Anda para pencari kerja dan jangan lupa untuk membagikannya kepada teman atau kerabat yang membutuhkan.
Informasi seputar lowongan kerja BUMN, CPNS & Swasta lainnya kunjungi www.lokerblog.com

Posting Komentar

0 Komentar